ArchitectureWeek DesignCommunity Forum Index » PowerCADD Discussion

View previous topic :: View next topic
Author	Message
fullerarch Joined: 28 Apr 2004 Posts: 1	Posted: Wed Apr 28, 2004 8:01 pm    Post subject: Plotting in OSX on HP 250C I am in the process of upgrading powercadd to OSX and I think that I will have to buy new plotter drivers. I have been using power plot for 8-9 years. Does anyone have info on this and recommended driver program?
Back to top	share:   blogger     del.icio.us     digg     slashdot
Matt Joined: 13 Apr 2004 Posts: 400 Location: Sterling, Virginia	Posted: Wed Apr 28, 2004 8:15 pm    Post subject: Gimp Print. It's free. read all about it in the Bullpen: http://www.rosegill.com/Bullpen/Printing/GimpPrint/GimpPrint.html there's even an example there with the 250C
Back to top	share:   blogger     del.icio.us     digg     slashdot
lavardera Joined: 13 Apr 2004 Posts: 420 Location: merchantville, nj	Posted: Wed Apr 28, 2004 8:55 pm    Post subject: Yes! I have a 250c and I have been running it for well over a year on OSx and Gimp Print. If you are not using PowerPlot over ethernet now then the one thing you will probably need to do is get a print server box. You set up the driver using IP printing and you are good to go. _________________ -- greg
Back to top	share:   blogger     del.icio.us     digg     slashdot
Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First

ArchitectureWeek DesignCommunity Forum Index » PowerCADD Discussion

Page 1 of 1