help needed! BADLY!!!!


 
Post new topic Reply to topic
   ArchitectureWeek DesignCommunity Forum Index » Residential Design and Building Forum
View previous topic :: View next topic  
Author Message
brianstrange



Joined: 26 Oct 2005
Posts: 3

PostPosted: Wed Oct 26, 2005 8:42 am    Post subject: help needed! BADLY!!!! Reply with quoteFind all posts by brianstrange

I just added a 16' x 16' room to my house and it's sinking. I found out that the contractor didn't use footings under the 10" piles, and at least two piles are sinking into the ground. I tried jacking one into the ground and it went 20" before starting to bind and tilt.

The structure specs

One side is attached to existing house
16' x 16'
2x10 floor joists
2x10 rafters, 7 pitch roof
2x8 ceiling joists
Leaning on (4) 10" tubes filled with concrete, 4' deep

Facts (helpful?):
The soil is a powdery clay type.
When jacking on top of grade,with a 12" x 18" board as a base, the base settles 6" before lifting the room.

I am planning to install four footings below 12" tubes and was wondering what size pad (footing) I should form.

Also, any suggestions would be a huge help!
Back to top
View user's profileSend private messageSend e-mail    share:   blogger     del.icio.us     digg     slashdot    
Display posts from previous:   
Post new topic Reply to topic
   ArchitectureWeek DesignCommunity Forum Index » Residential Design and Building Forum Page 1 of 1

 




Latest Posts   ·   ArchWeek Jobs Board   ·   Classifieds   ·   User Galleries   ·   Scrapbook   ·   Open 3D Gallery
 Architecture Search   by name of Building, Architect, or Place:  
Buildings     Architects     Types & Styles     Places     Models     GB Image Index     ArchWeek Library
Professional Directory   Web Directory   Competitions   Conferences   Events & Exhibits     Products     Media Kit
DesignCommunity   ·   ArchWeek   ·   Great Buildings   ·   Archiplanet   ·   Books   ·   Blogs   ·   Free 3D   ·   Search
© 2004-2008 Artifice, Inc. · Powered by phpBB © 2001, 2002 phpBB Group
Thème myApple v2.0.1 créé par myTemplate